Bestlaminate Pro-line Espresso Maple Pll8003 Laminate Flooring Review

Matt is a professional painter who owns and operates his ain painting business, specializing in interior and outside house painting.

When prepared and painted correctly, the shine profile of maple cabinets looks very dainty coated with semi-gloss pigment.

Reward Painting Services

Can Maple Cabinets Be Painted?

Maple is a hardwood with a closed grain and a smooth surface. Different oak, which is a ring-porous wood with an open grain, maple doesn't usually accept any surface cracks, or even much grain blueprint.

When prepared and painted correctly, the smooth profile of maple cabinets looks very nice. I recommend coating with a semi-gloss paint. The grooming is besides a lilliputian easier, since it doesn't require a coating of woods-grain filler similar oak does. Painting maple cabinets does still involve a lot of surface preparation to get maximum immovability.

1. Remove the Chiffonier Doors and Hardware

Removing the doors, drawers, pulls, and hardware is a must when painting. I gear up a couple of sawhorses and lay the doors downwardly flat to work on them.

After removing the hinges from the door, number each door in the swivel cavity with a black marker and place a piece of tape over it. When numbering the doors, I count each one, starting with the upper cabinets from left to right. Store the screws in a Ziploc bag then they don't become lost.

2. Remove Dirt and Grease

I clean cabinets for paint with Dawn dish soap and a coarse scrubbing pad (green color). You lot tin also use TSP (trisodium phosphate) in liquid or granule form.

TSP cleans wood well and dulls the articulate finish on the surface a little, but the reason I don't apply it much is that the residue can cause adhesion problems with primer and paint if not rinsed thoroughly. TSP tin can likewise cause skin irritation. Dawn lather cleans fine without having to worry about potential adhesion bug.

Is Deglosser Necessary for Maple?

I take experimented with different deglossing agents, but none remove gloss as well every bit my Makita random orbital sander. A good sander completely removes gloss, using the right sandpaper. Deglossing cleaner can go out heavy residue on the surface that oftentimes requires more cleaning.

In my opinion, using a separate deglosser is unnecessary if you're doing thorough sanding anyway, which you should be. The master reason to make clean the cabinets is to remove clay and grease so the primer and paint bond well with the surface. Dish soap with warm water is plenty.

iii. Sand the Cabinets

The surface needs to exist cleaned and sanded before painting. Maple is a hardwood, simply the forest consistency is a picayune softer than oak, so using sandpaper that'south too coarse can actually abrade the wood too much and cause a hairy-like texture. For maple, the grit that works well for me is 120-grit. This grit is coarse enough to remove surface gloss and expose the bare wood without causing impairment.

The best way to do the sanding is with a random orbital sander. Sanding without 1 takes forever and doesn't work likewise. All of the doors, drawers, and wall boxes need to exist sanded thoroughly.

After sanding, the surface should be wiped downwardly with a tack cloth. Yous can also utilize an air compressor to blow the dust out from the inside corners of the panels on the fronts of the doors. Sanding should also be done between coats of primer and paint to remove crumbs and dust particles that get stuck in the drying paint.

4. Prime the Doors, Drawers, and Wall Boxes

I prime number maple cabinets using an airless sprayer, equipped with a fine end spray tip. Brushing and rolling are fine likewise, if you don't want to apply a sprayer, just spraying is the way to go if you want the best end on your maple cabinets. Spraying also saves a huge corporeality of time without the noticeable texture created from brushing and rolling.

Latex or Oil Primer?

Oil primer, or shellac primer, are the best options. The best primer is 1 formulated to seal the surface and human action equally a bond glaze. Most latex primers won't seal forest surfaces well or create a expert bail glaze.

Scroll to Continue

v. Utilize a Drying Rack

Whether spraying the doors or brushing and rolling, they'll demand to be stored while each coat dries. You tin place them on a sawhorse set up, but a drying rack is the best. I utilise the Door Rack Painter, which saves me tons of time while conserving space. This detail rack setup allows both sides of the door to exist painted the same mean solar day instead of having to look for one side to dry out earlier y'all tin flip it to paint the other side.

half-dozen. Apply Two to Three Coats of Paint

I spray two coats of primer and two coats of paint with a sprayer. With spraying, the paint always covers in two coats considering you tin can use a thicker, heavier glaze to become better coverage. Painting past hand usually takes an extra coat, especially if the color is white. I definitely recommend spraying.

The paint I use the most is Pro Classic acrylic semi-gloss from Sherwin Williams. This paint levels actually nicely when sprayed. Advance by Benjamin Moore is another paint that tin be used for maple cabinets, but information technology dries really slowly. The re-glaze time on Pro Archetype is only 4 hours, which allows the second coat to be practical the same day.

There are other good paints to use too, but Pro Archetype has always worked really well for me. With my Graco airless sprayer, I use a 210 and 212 fine finish spray tip to spray pigment maple cabinets. If it's warm where y'all live, it's best to spray the chiffonier doors outside, or you can plastic off walls in a nearby room. If you lot spray the wall boxes too, there is a lot of masking involved to protect against over-spray.

This article is authentic and truthful to the best of the author'southward knowledge. Content is for advisory or amusement purposes only and does non substitute for personal counsel or professional advice in business, financial, legal, or technical matters.

Questions & Answers

Question: I would like to paint my maple cupboards. Which is the best grey or off-white paint to use?

Answer: Painting cabinets white is the current tendency. Every cabinet job I've washed, except for 1, has been white.

Question: Do I likewise sand the wall boxes on the walls before priming? Would you recommend hanging protection earlier we sand or just earlier we prime and pigment?

Answer: Yes, the wall boxes and the doors should be sanded. Information technology's a good idea to prepare upwards a plastic barrier earlier sanding. The dust goes everywhere. I apply Zipwall.

Question: Which Graco sprayer would you recommend for a kitchen project? I'm looking for professional results.

Respond: You can often hire a Graco 390 or 490 airless sprayers from a pigment shop. Apply the Graco Rac ten tip guard (blue) with their fine cease tip (dark-green). You can ever buy a cheap Graco magnum sprayer from a major dwelling improvement store as well but I've never used one. I ain a Graco 495 airless and that's what I use for all of my painting projects, including cabinets. Another option is an hvlp sprayer, but you would have to thin the paint. With an airless, you don't accept to sparse annihilation and you can get a really dainty finish with the fine finish tips I mentioned.

Question: Do you have to strip all of the clear glaze off the maple cabinets or just sand it to remove the shine?

Answer: Sand if off until the surface is tiresome.

Question: Are the paints you refer to above latex or oil-based?

Answer: They are latex paints.

Question: Do y'all practise a clear glaze on your cabinets? Wondering because I accept pocket-sized children.

Reply: No, I usually don't.

Question: What is the best non-flammable oil primer for spraying?

Answer: All oil primer is flammable. I would just hire a professional sprayer from a paint store so you can spray your cabinets with oil primer. Otherwise, the only other option is to use latex primer and I don't recommend that. It costs $50 to $75 per day to rent a sprayer.

Question: Do you sand the cabinets with a fine dust newspaper in between the two coats of paint?

Answer: I sand after both coats of primer and in between paint, if needed, to smooth out whatsoever rough spots, or crumbs stuck in the paint. I use 220 dust to sand the coats of primer and 320 grit for the paint. The 3M sanding sponges for detailing are great for sanding in between coats on cabinet doors. You don't have to sand aggressively. Scuff sand is fine.

Matt G. (author) from United states on September 08, 2019:

Suz,

No, I recommend Emerald urethane over ProClassic for chiffonier painting. I use it for all of my chiffonier painting projects. ProClassic is good enamel too, but Emerald urethane dries harder.

Suz on September 08, 2019:

Hi, exercise you still recommend the pro classic over the emerald uerathane for Maple cabinets?

Matt G. (author) from United States on April 29, 2019:

Thank you Mary. I'k glad you found it helpful.

Mary on April 29, 2019:

Thanks so much for the great info. While I don't plan on painting them myself this will assistance tremendously when hiring a painter to practise them. At present I know the questions to ask and will require spray painting.

cherrydiestill.blogspot.com

Source: https://dengarden.com/home-improvement/Tips-for-Painting-Maple-Cabinets

Cherry Diestill